The IP address of the Wavlink WiFi range extender is considered as an alternative to the wifi wavlink com setup URL. But sometimes, the users can neither access the IP address nor the web URL. In those cases, managing the home network becomes a difficult task since there is no other option available for the same.
This makes it quite important to troubleshoot the issue. We understand your concern and are assuming that you’re also facing the same problem. Isn’t this the reason why you are reading this post? Well, whatever it might be. This post will highlight a few fixes that can help the user make the extender’s IP address work. In case you are not facing this problem, you can use these techniques to boost your knowledge and use them as preventive measures.
Fixed: Wavlink Extender IP Address Not Working
Prior to implementing any of the troubleshooting techniques listed below, verify that you are using the correct IP address to access the range extender’s admin portal. You can get knowledge about the correct IP from the extender’s label. The same can also be found in the user manual of the product. Apart from this, ensure the following:
- There are no typing errors in the IP entered by you as entering any character incorrectly might take you to the page that you do not want to access
- The IP address has been entered into the address bar of the web browser. We do not need to tell that no IP or web address can be accessed with the aid of the search box.
If both these things are correct with respect to the IP address entry, then there is a possibility that the problem has shown up due to some other reason. Taking the help of the following tips is recommended ideally.
Fix 1: Hard Refresh the Web Browser
The Wavlink extender IP address not working issue can be fixed by hard-refreshing the web browser in use. You can refresh Google Chrome by pressing the Ctrl + F5 key or clicking the Reload button located adjacent to the address bar. But, remember that different web browsers require different approaches for hard refresh. Thus, do your homework before doing anything. Apart from this, using an updated version of the web browser is also recommended. The reason is that outdated browsers halt access to various networking devices’ management screen.
Fix 2: Mend the LAN Connection
Perhaps, the LAN cable connection between your Wavlink range extender and the main router has become weak due to which the internet issue has arisen. This is no surprise that IP or web addresses fail to work in the lack of a sound internet connection. Therefore, you are suggested to examine the LAN cable’s entire length and check for cuts on it. Just in case any cuts are found on the cable, you are required to get the cable substituted with a new one. Making the connection finger-tight should also be on your to-do list. And the most important part is the utilization of the correct ports of the devices for the connection.
The Final Thoughts
The Wavlink extender IP address not working issue can show up at any time and hence you should be ready to troubleshoot it. Although the tips given above will help you address the issue effectively and reach the Wavlink WiFi extender setup wizard, on the off-chance they don’t, you are suggested to temporarily disable the antivirus program installed on the PC. Take the aid of the Control Panel to get this task accomplished. Moreover, verify that you are not attempting to access the IP address via a VPN server.
But, have you ever thought of the case when all the techniques become null and void? There, the master technique of performing a factory default reset comes into the picture. Just locate and press the Reset button located on the periphery of your range extender. Very soon, you will notice that it has started flaunting the default settings. Thus, you can set it up again, and that too with the use of the default IP address.