Although the Linksys Velop WiFi app is a platform for an easy setup including some other features as well. However, you will need to be aware of the app’s usage and the Velop setup tips for a successful setup. In this post, we will discuss “The ultimate guide to setting up Linksys Velop using the app”. Check the information and use that in the right sequence.
Before you move to the Linksys Velop setup app process, ensure to make it ready for the setup. Which includes only a few points and collecting some things. Here are those:
The Velop setup requires collecting the prerequisites first so that there are no hassles in it. Though there are not any specific things required you will need some basic items.
- The Linksys Velop master and child nodes
- Also, the default login and other details of Velop
- Your existing modem with an internet connection on it
- Any device such as a laptop, PC, or tablet
- Ethernet and power cables to connect devices
Place The Velop Ideally
Choose an ideal location for the Velop parent node and try to locate it near the existing modem. But, don’t place it near the electrical appliances, metallic things, and concrete thick walls. These things can hamper the signal transmission of Velop.
Install The WiFi App
While choosing the placement of the Velop, install the WiFi app on your smartphone from the app store. This app will be available on both the Google Play Store and the Apple App Store. So, choose your preferred device and launch the official app on it.
Attach Node To Modem
To configure the Velop parent node, it is necessary to have a strong connection between the node and the modem. So, use an ethernet wire and insert the ends into the node and your modem’s ports. Make sure there is a successful connection between them and the node is prepared for the setup.
Log Into The Velop App
Now, access the Linksys WiFi app portal and log into the Velop using the default login credentials. However, there will be a Velop login window appearing rather than the Linksys extender login portal. Be sure to enter the default and accurate login details without any spelling mistakes. You must change the default username and password after the setup for security purposes. After logging into the Velop, the app portal will open the setup page on the device’s display.
Set Up The Parent Node
As you reach the setup window, the WiFi app will automatically find and select the network from the list. If it is not, then click on the “Setting Up A Parent Node” option and configure the Velop using the screen directions. Afterward, create a new SSID network name and set a strong password for the network. Lastly, attach your devices to the network once the Velop node has a solid blue LED on it.
Note: In case you have an extender at your place, you can use the same WiFi app for the Linksys WiFi extender setup.
Set Up The Child Nodes
Apart from setting up the parent node, you can configure the child nodes in the same way from the app. So, connect the child nodes to the parent node using ethernet cables and place them strategically or in corners. After that, choose the “Add wired child nodes” option and set up them by inserting the required details. The configured nodes will work to cover the WiFi dead spots from your place by delivering signals.
Customize The Network
After completing the setup, make some changes to the advanced settings of the network for enhanced performance. Access the wireless settings of Velop and choose the options separately to manage them well. Foremost of all, activate the frequency bands such as 2.4 GHz and 5 GHz if your Velop supports them. Create a guest network for visitors or external users, and you will not need to share your private network with them.
After this, select the WiFi channels that are least used and different from your neighbors’ networks. For the safety of your network, enable the latest security encryption from the same window that is WPA2 or WPA3. Finally, check the list of connected devices, if there is any unauthorized user, then change the network password immediately.
Troubleshoot Common Issues
There can be some performance or other technical issues occasionally, even with the user-friendly Velop setup. If you also experience errors with your WiFi network use these resolving tips in accordance with the problems.
If your devices are getting intermittent connectivity, check the nodes’ placement and make sure they are placed strategically. Locate the parent node centrally in your house and the child nodes to the corners. Besides that, check for the firmware update and upgrade the version if there is a new one available.
Slow Internet Speed
Interruptions from electrical appliances, metallic things, and thick concrete walls can make the internet speed sluggish. So, try to locate those things away from the parent and child nodes to avoid signal interruptions. Lastly, you can reboot the Velop node and make connections again as this simple method will help you a lot.
Confirm that “The ultimate guide to setting up Linksys Velop using the app” is enough for your Velop configuration. However, if you need more help with this, contact our tech experts right away.